ANT

Compact weighing indicator

A compact weighing indicator for a range of industrial weighing applications.

Request a quote Open the manualDocument language: Türkçe · 884 KB

ANT, Compact weighing indicator — True dimensions; the view is built from product photos.

scale, multi-material: 1
Modbus RTU: RS485
internal counter resolution: 20 bit
mm: 70 × 91 × 58

ANT is a single-scale weighing and dosing control unit with multi-material filling. It was designed for concrete plant automation, and its compact build suits other industrial weighing jobs as well.

It communicates over RS485 Modbus RTU. Calibration is done with the device keys or from BetonicTCP.

In 5-scale plants, ANT is added next to the HAWK automation set to weigh the fifth scale: HAWK + ANT 5-scale set.

Technical specifications

Weighing

Scale: 1 scale, multi-material filling
Input type: Load cell or pulse meter
Load cell excitation: 5 V DC
Load cell input resistance: 350 Ω
Internal counter resolution: 20 bit

Inputs and outputs

I/O: 2 digital inputs, 2 digital outputs (fast and fine filling)

Communication

Communication: RS485 Modbus RTU
Baud rate: 1200 - 115200 bps

Electrical

Supply voltage: 12-24 V DC (24 V DC recommended)

Mechanical and environment

Dimensions: 70 × 91 × 58 mm
Operating temperature: -20 °C to +50 °C

Source: ANT User Manual (Turkish, firmware VR 52)

For demonstration only

Put a load on the scale,
watch the reading.

Drag the test weights onto the platform or tap to place them. The reading swings until the load settles; once it holds, the stable lamp lights up. Try the zero and tare keys as well.

For demonstration only. The weights and readings are examples; this is not an exact copy of the HAWK or ANT display. Capacity and division are set for your scale.

Weighing indicatorExample

Total (gross): 0 kg
Tare: 0 kg
Net: 0 kg

Scale platform

Test weights

Drag a weight onto the platform or tap it; tap again to put it back.

Manuals and documents

ANT user manual (Turkish)User manualPDF · 884 KBDocument language: TürkçeOpen PDF (opens in a new tab)

Troubleshooting ANT

Troubleshooting steps from the manual. Pick the problem to see the steps.

Full troubleshooting guide

Weighing is wrong after C 01, C 02 or C 03 was changedANTHAWK

Possible cause

Scale capacity and calibration are set by C 01 (division value), C 02 (number of divisions) and C 03 (decimals); changing them breaks the calibration.